Air King LEDAK50 Bedienerhandbuch PDF herunterladen

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

SAVE THESE INSTRUCTIONS

www.airkinglimited.com

210572203 Rev. X 7-18 1 of 12

Exhaust Fan with Light

Models: LEDAK50, LEDAK80, LEDAK100,

LEDAK80H, LEDAK100H

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN

THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY

INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL

INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should

always be followed to reduce the risk of ﬁre, electric shock and

injury to person, including the following:

WARNING:

TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK AND INJURY TO

PERSON, OBSERVE THE FOLLOWING:

a) Use this unit only in the manner intended by the manufacturer.If you have

questions, contact the manufacturer.

b) Before servicing or cleaning the unit, switch power off at service

panel and lock the service disconnecting means to prevent power

from being switched on accidentally. When the service disconnecting

means cannot be locked, securely fasten a prominent warning

device, such as a tag, to the service panel.

WARNING: TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK AND INJURY TO

PERSON, OBSERVE THE FOLLOWING:

a) Installation work and electrical wiring must be done by qualiﬁed

person(s) in accordance with all applicable codes and standards,

including ﬁre-related construction.

b) Sufﬁcient air is needed for proper combustion and exhausting of

gases through the ﬂue (chimney) of fuel burning equipment to prevent

back drafting. Follow the heating equipment manufacturer’s guideline

and safety standards such as those published by the National Fire

Protection Association (NFPA) and the American Society for Heating,

Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local

code authorities.

c) When cutting or drilling into wall or ceiling, do not damage electrical

wiring and other hidden utilities.

CAUTION: FOR GENERAL VENTILATING USE ONLY.

DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE

MATERIALS AND VAPORS.

d) Ducted fans must always be vented to the outdoors.

e) This unit must be grounded.

f) To avoid motor bearing damage and noisy and/or unbalanced impellers,

keep drywall spray, construction dust, etc. off power unit.

g) Read all instructions before installing or using exhaust fan.

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, DO NOT USE THIS FAN WITH

ANY SOLID-STATE SPEED CONTROL DEVICE.

a) If this unit is to be installed over a tub or shower, it must be

marked as appropriate for the application and be connected to a

GFCI (Ground Fault Circuit Interrupter) – protected branch circuit.

b) Do not install in a ceiling with thermal insulation value greater

than R40.

WARNING: DO NOT USE IN KITCHENS.

WARNING: THE DUCTING FROM THIS FAN TO THE

OUTSIDE OF THE BUILDING HAS A STRONG EFFECT

ON THE AIR FLOW, NOISE AND ENERGY USE OF THE FAN. USE

THE SHORTEST, STRAIGHTEST DUCT ROUTING POSSIBLE FOR

BEST PERFORMANCE, AND AVOID INSTALLING THE FAN WITH

SMALLER DUCTS THAN RECOMMENDED. INSULATION AROUND

THE DUCTS CAN REDUCE ENERGY LOSS AND INHIBIT MOLD

GROWTH. FANS INSTALLED WITH EXISTING DUCTS MAY NOT

ACHIEVE THEIR RATED AIRFLOW.

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - OPERATING MANUAL

IMPORTANT INSTRUCTIONS -OPERATING MANUALSAVE THESE INSTRUCTIONSwww.airkinglimited.com210572203 Rev. X 7-18 1 of 12Exhaust Fan with LightModels: LEDAK

Seite 2 - SECTION 3

www.airkinglimited.com210572203 Rev. X 7-18 10 of 124. Installez la lampe dans la douille en alignant les broches de la base de la lampe à la prise d

Seite 3 - SECTION 6

www.airkinglimited.com210572203 Rev. X 7-18 11 of 12Guide de dépannage Trouble Cause Possible Solution Suggérée 1. Le ventilateur ne fonctionne p

Seite 4

www.airkinglimited.com210572203 Rev. X 7-18 12 of 12DIAGRAMME DES PIÈCES DE REMPLACEMENT# Qté. Description# de pièce de remplacement1 4 Traverses de M

Seite 5 - CUSTOMER SERVICE:

INSTALLATION INSTRUCTIONSCAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.SECTION 1Preparing the Exhaust Fan1.

Seite 6 - REPLACEMENT PARTS DIAGRAM

1b. Internal Wire Compartment: Remove the screws holding the blower assembly in place and lift assembly out of housing (Figure 7). Remove the wire co

Seite 7 - MANUEL D’OPÉRATION

www.airkinglimited.com210572203 Rev. X 7-18 4 of 125. Install the reﬂector onto the grill by placing the slots on the side of the reﬂector over the l

Seite 8

www.airkinglimited.com210572203 Rev. X 7-18 5 of 12Troubleshooting Guide Trouble Probable Cause Suggested Remedy 1. Fan does not operate wh

Seite 9

www.airkinglimited.com210572203 Rev. X 7-18 6 of 12REPLACEMENT PARTS DIAGRAM# Qty. DescriptionReplacement Part #1 4 Mounting Rails 5S12990022 2 Mounti

Seite 10 - SECTION 8

INSTRUCTIONS IMPORTANTES – MANUEL D’OPÉRATIONCONSERVER CES INSTRUCTIONSwww.airkinglimited.com210572203 Rev. X 7-18 7 of 12Ventilateur combiner, compre

Seite 11 - SERVICE À LA CLIENTÈLE :

INSTRUCTIONS D’INSTALLATIONATTENTION : VOUS ASSURER QUE L’ALIMENTATION EST COUPÉE AU PANNEAU DE SERVICE AVANT DE COMMENCER L’INSTALLATION.SECTION 1Pr

Seite 12

1a. Compartiment de Câblage Extérieur : enlever la vis du couvercle du compartiment à câblage et mettre ce couvercle dans un endroit ﬁable (Figure 6)